Riding boots Aries
€349.00*
Available, delivery time: 6 weeks
Which size fits you?
Three measurements, one recommendation. Takes a minute.
To double-check: heel against the wall, mark the longest toe and measure the foot length, ideally in the evening.
Typical mistake: Trainer size. It runs half a size larger.
Measure both legs, the stronger one counts. Wear the breeches and socks you ride in. The tape sits snug but does not squeeze.
Typical mistake: Measured without breeches – then 1 cm is missing.
Bend the knee slightly, mark the lowest crease in the hollow of the knee, straighten again. Measure at the back from the floor to the mark, easier with a second person.
Typical mistake: Deliberately chosen higher. A new boot sits 1–2 cm higher anyway and settles with wear.
First the shoe size, then shaft height and calf width. Each cell shows whether that version is available.
- in stock
- 5–7 days from the manufacturer
- sold out
- Soft leather
- Care with boot cream
- Preserves elasticity
- Durable finish
- Elegant jodhpur boot
Description
Care
The leather part should be cared for with EGO7 Boot Cream to maintain elasticity and durability. Leather boots must dry after wearing and be stored in a cool, dry and well-ventilated place — always away from direct heat or sunlight to avoid cracks and hardening.
The EGO7 Boot Cream leather conditioner also offers surface protection against aggressive environmental influences and preserves the ideal moisture and the beautiful appearance of the material. Apply the EGO7 Boot Cream carefully with a brush and make sure to cover the entire leather surface. Leave it to work for a few minutes and polish with a wool cloth. Use boot trees so the boots keep their original shape. The practical inflatable boot trees help keep them perfectly in shape.
The inner part made of E-tex material, which provides extra durability and resistance, needs NO CARE. That means: no polish, no cream, no sprays and no greases. Chemicals could damage the material irreversibly. Clean it with a damp cloth to remove dirt.
Zips
We like to compare zips to a car tyre so you can better understand some mechanical aspects. The lifespan of the zips mainly depends on how you treat them — just as the condition of your car tyre depends on your driving style, the road conditions and the mileage. So here are a few extra tips:
We recommend supporting the zip with your fingers the first time you put the boots on, without pulling or straining it too hard.
When putting on and taking off the riding boots, always make sure the zip is fully open. You can use the practical inner pull tab to put them on.
Cleaning the zip is important: dirt such as grease or sweat can hinder normal opening and closing and eventually lead to tearing or sudden breakage.
Also make sure that your clothing or other items do not get caught in the zip mechanism.
Properties
| Colour selection: | black |
|---|---|
| Gender: | Gents, Ladies |
| Product type: | Riding boots |
Manufacturer
Ego7
Postal address: EGO7, Vicolo Barriera 4, 31058 Susegana, Treviso, Italy
Email: info@ego7.it
Reviews 0
How to find the right size for your riding boots
Use the manufacturer's size chart
Every manufacturer has a different cut. So always use the size chart for the specific model and check whether it gives your leg measurements or the measurements of the boot. With Busse, the numbers in the size refer to your leg measurements: '39 NN · Bein 46 cm · Wade 34–36 cm', for example, means a leg height of 46 cm and a calf circumference of 34–36 cm.
Measure your foot length
Measure the length of your foot from the longest toe to the heel, ideally in the afternoon or evening, and compare it with the manufacturer's size chart.
Measure your leg height (shaft height)
Bend your leg slightly and mark the lowest crease at the back of the knee. Then straighten your leg again and measure at the back from the floor to the mark. It's most accurate if a second person helps you.
Measure your calf circumference
Measure both calves at several points and take the widest circumference of the larger leg. If the manufacturer specifies a different way of measuring, follow that.
Clothing and time of day
When measuring, wear the breeches and riding socks you'll later wear in the boots, and measure at the time of day when you usually ride.
Choosing your size
- Choose the height and width exactly as the size chart specifies for your measurements. Don't deliberately buy tighter or higher.
- Many manufacturers, e.g. Busse, have already factored the dropping of the leather into their measurements. A new leather boot therefore sits a little higher and tighter at first. This is intentional and no reason to choose a different size.
- Boots with a synthetic shaft keep their shape, so the measurement should fit straight away.
- Your heel and ankle need a little play so that you can ride comfortably.
Not sure?
We're happy to advise you. Send us your shoe size, leg height and calf circumference via WhatsApp to +49 157 92457351, call us on +49 (0)231 586 891 40 (Mon–Fri 08:00–16:00) or book a video consultation.
How to find the right size for your riding boots
Use the manufacturer's size chart
Every manufacturer has a different cut. So always use the size chart for the specific model and check whether it gives your leg measurements or the measurements of the boot. With Busse, the numbers in the size refer to your leg measurements: '39 NN · Bein 46 cm · Wade 34–36 cm', for example, means a leg height of 46 cm and a calf circumference of 34–36 cm.
Measure your foot length
Measure the length of your foot from the longest toe to the heel, ideally in the afternoon or evening, and compare it with the manufacturer's size chart.
Measure your leg height (shaft height)
Bend your leg slightly and mark the lowest crease at the back of the knee. Then straighten your leg again and measure at the back from the floor to the mark. It's most accurate if a second person helps you.
Measure your calf circumference
Measure both calves at several points and take the widest circumference of the larger leg. If the manufacturer specifies a different way of measuring, follow that.
Clothing and time of day
When measuring, wear the breeches and riding socks you'll later wear in the boots, and measure at the time of day when you usually ride.
Choosing your size
- Choose the height and width exactly as the size chart specifies for your measurements. Don't deliberately buy tighter or higher.
- Many manufacturers, e.g. Busse, have already factored the dropping of the leather into their measurements. A new leather boot therefore sits a little higher and tighter at first. This is intentional and no reason to choose a different size.
- Boots with a synthetic shaft keep their shape, so the measurement should fit straight away.
- Your heel and ankle need a little play so that you can ride comfortably.
Not sure?
We're happy to advise you. Send us your shoe size, leg height and calf circumference via WhatsApp to +49 157 92457351, call us on +49 (0)231 586 891 40 (Mon–Fri 08:00–16:00) or book a video consultation.