- Capacity: 17 ml
- Material: Makrolon = transparent, biocompatible, robust and hard-wearing
- Droplet size: 3.92 µm MMAD → mass fraction < 5 µm = approx. 45 %.
- Capacity: 0.8 ml NaCl / minute
- Fit: different sized sealing rings allow the mask to be customised
Attention: The Nebu-Tec inhalation set and accessories are medical products. Trying out the device is an obligation to purchase, as is opening any packaging.
Product type: | Inhalers |
---|

NEBU-TEC
Postanschrift: NEBU-TEC International med. Produkte Eike Kern GmbH, Kreuzfeldring 17, 63820 Elsenfeld, Deutschland
E-Mail: [email protected]
Login

ALLGEMEIN, PFLEGE, TIPPS & TRICKS
Inhalator für Pferde
Atemwegserkrankungen bei Pferden sind der zweithäufigste Grund für die Diagnose „unreitbar“. Ein Gang durch die Stallgasse vieler Reitställe bestätigt das Ergebnis einer Studie: Jedes vierte Pferd hustet oder hat andere Atemwegsprobleme.
Die Ursachen für akute und chronische Atemwegserkrankungen bei Pferden können vielfältig sein und leider gibt es kein Allheilmittel. Die Inhalation kann jedoch als unterstützende und vorbeugende Behandlung für Pferde mit Erkrankungen der Atemwege dienen. Die Firma NEBU-TEC hat mit ihrer langjährigen Expertise in der Humanmedizin und in Zusammenarbeit mit Tierärzten ein Inhalator für Pferde – das Inhalationsset SaHoMa®-II entwickelt.

Was bringt die Inhalation mit der SaHoMa®-II
- salzige Meeresluft der Küste wird nachempfunden
- unkompliziert, einfach und selbst durchführbar
- Inhalation mit Medikamenten bei einer akuten Erkrankung
- geschlossene Maske verhindert, dass der Wirkstoff an die Umgebungsluft verloren geht
- Abtransport von Schleim kann gefördert werden
- angegriffene Schleimhäute können sich regenerieren

First, slowly and carefully pull the sealing ring over the nostrils and place it on the bridge of your horse's nose.

Place the housing over your horse's nostrils so that the sealing ring fits into the recess in the housing.

Guide the fastening strap behind the ears along the back of your horse's neck and close it with the quick-release fasteners. Attach the throat lash between the chin pit and the ganache so that the inhalation mask can rest comfortably on the head.

Slide the control unit over the guide rail of the housing until you feel and hear it click into place.

Insert the SaHoMa®-II filter membrane into the filter basket. Both can be pushed over the fastening pins on the housing until the tabs audibly click into place.

For further assembly of the inhaler, you will need the SaHoMa®-II mesh nebuliser unit with the lid fix for mesh nebuliser units.

Once the mesh nebuliser unit is filled, you can connect it to the housing. Then connect the connection cable to one of the two outputs of the control unit.

Slide the cover along the guide rails of the housing until you hear it click into place.
Before carrying out an inhalation procedure with the inhalation set, you must be familiar with the instructions for use. A vet must be consulted to diagnose a respiratory disease and to determine suitable treatment - we advise against self-diagnosis.